Panasonic KX-FT37NZ - Manual (Page 44)

Receiving Faxes
TEL mode
(answering all calls manually)
1
2
When the unit rings, press (DIGITAL SP PHONEl
or lift the handset to answer the call.
When;
—document reception is required,
—a fax calling tone (slow beep) is heard, or
—no sound is heard,
press (START/COPY/SETl.
Display: CONNECTING
Hang up the handset, if using it.
® The unit will start reception.
Handset
Note:
« If you do not answer the call within 15 rings, the unit
will temporarily activate the answering device. If you
want to change to the TAD/FAX mode, enter the
remote operation ID (see page 66) during the greeting
message.
9 if the MANUAL RECEIVE setting is set to the TEL/FAX
mode, reset it to the TEL mode (see page 46).
To stop receiving
Press [STOP).
Friendly reception feature
When you answer a call and hear a fax calling tone
(slow beep), the unit will automatically start receiving
even if you do not press [START/COPY/SETl.
9 If this feature is not required, set to “OFF” (see
page 54).
Memory reception
When a printing problem is detected, the unit will
temporarily store the received document into
memory.
While documents are in memory, the unit will:
— display an error message and the following
message alternately;
Display: FAX IN MEMORY
9 Follow the instructions on page 77 to solve the
problem and print the stored document.
® For memory capacity, see page 93.
44