DVR systems IPC - Manual (Page 90)

Network Camera User’s Manual 88
Note: You can click or on each column heading to order the
information; you can click to expand the device table and hide the
network parameter panel on the right side, or click to show the
network parameter panel.
●Modify network parameters
Steps:
1. Select the device to be modified in the device list and the network parameters of
the device will be displayed in the Modify Network Parameters panel on the
right side.
2. Edit the modifiable network parameters: IP address and port number.
3. Enter the password of the admin account of the device in the Password field and
click to save the changes.
Figure A.1.2 Modify Network Parameters
● Restore default password
Steps:
1. Contact our technical engineers to get the serial code.
Note: Serial code is a series of characters combined by the start time and the serial
number of the device.
2. Input the code in the Serial code field and click
to restore the default
password.