6 maintenance, 1 rebooting the camera, 2 restoring default settings – DVR systems IPC User Manual
Page 86: 3 importing/exporting configuration file
Network Camera User’s Manual
84
10.6 Maintenance
10.6.1 Rebooting the Camera
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance:
2. Click
to reboot the network camera.
Figure 10-12
Reboot the Device
10.6.2 Restoring Default Settings
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click
or
to restore the default settings.
Figure 10-13
Restore Default Settings
Note:
After restoring the default settings, the IP address is also restored to
the default IP address, please be careful for this action.
10.6.3 Importing/Exporting Configuration File
Steps:
Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
1. Click
to select the local configuration file and then click
to