DVR systems IPC User Manual

Page 37

Network Camera User’s Manual

Figure 6-2 Time Settings

●Select the Time Zone.

Select the Time Zone which is the closest to the location of the camera from the
drop-down menu.

●Synchronizing Time by NTP Server.
(1) Check the check box to enable the NTP function.
(2) Configure the following settings:

Server Address: IP address of NTP server.
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions with NTP
server.

Figure 6-3 Time Sync by NTP Server

Note: If the camera is connected to a public network, you should use a NTP server that has a time synchronization function, such as the server
at the National Time Center (IP Address: 210.72.145.44). If the camera is set in a customized
network, NTP software can be used to establish a NTP server for time
synchronization.
●Synchronizing Time Synchronization Manually

Enable the Manual Time Sync function and then click

to set the system time from the

pop-up calendar.

Note:

You can also check the Sync with computer time check box to synchronize

the
time of the camera with that of your computer.