DVR systems IPC - Manual (Page 69)

Network Camera User’s Manual 68
6.6.8 Face Detection
Note: Face detection is only for certain modules, check the specification for whether
the module supports the function.
If you enable the face detection, once a face appears in the surveillance area, it will
be detected and certain actions may be triggered by the detection.
Steps:
1. Enter the face detection settings interface:
Configuration > Advanced Configuration > Events > Face Detection
2. Check the Enable Face Detection to checkbox to enable the function.
3. (Optional)You can check the Enable Dynamic Analysis for Face Detection
checkbox if you want the face detected get marked with rectangle in the live
view.
4. Configure the sensitivity of face detection. The default value is 5.
5. (Optional)You can also configure the linkage action for face detection.