DVR systems IPC - Manual (Page 43)

Network Camera User’s Manual 42
device alias in the server.
(4) Click to save the new settings.
Note: It will ask for a reboot for the settings to take effect.
6.3.5 Configuring SNMP Settings
Purpose:
You can set the SNMP function to get camera status, parameters and alarm related
information and manage the camera remotely when it is connected to the network.
Before you start:
Before setting the SNMP, please download the SNMP software and manage to receive
the camera information via SNMP port. By setting the Trap Address, the camera can
send the alarm event and exception messages to the surveillance center.
Note: The
SNMP version you select should be the same as that of the SNMP software. And you
also need to use the different version according to the security level you required.
SNMP v1 provides no security and SNMP v2 requires password for access. And SNMP
v3 provides encryption and if you use the third version, HTTPS protocol must be
enabled.
Steps:
1.
Enter the SNMP Settings interface:
Configuration > Advanced Configuration > Network > SNMP
Figure 6-12 SNMP Settings