DVR systems IPC - Manual (Page 14)

Network Camera User’s Manual 13
2.1.2 Detecting and Changing the IP Address
You need the IP address of the network camera to see it via a web browser.
Steps:
1. To get the IP address, you can choose either of the following methods:
●Use SADP, a software tool which can automatically detect the online network
cameras in the LAN and list the device information including IP address,
subnet mask, port number, device serial number, device version, etc.,
shown in Figure 2-3.
●Use the client software to list the online devices. Please refer to the user
manual of client software for detailed information.
2. Change the IP address and subnet mask to the same subnet as that of your
computer.
3. Enter the IP address of network camera in the address field of the web browser
to view the live video.
Notes:
●The default IP address is 192.0.0.64 and the default port number is 8000. The
default user name is admin, and password is 12345.
●For accessing the network camera from different subnets, please set the gateway for
the network camera after you logged in. For detailed information, please refer
to Section 5.3.1 Configuring TCP/IP Settings.
Figure 2-3 SADP Interface