DVR systems IPC - Manual (Page 29)

Network Camera User’s Manual 28
4.3 IP Property Settings for Wireless Network Connection
The default IP address of wireless network interface controller is 192.168.1.64. When
you connect the wireless network you can change the default IP.
Steps:
1. Enter the TCP/IP configuration interface.
Configuration> Advanced Configuration> Network> TCP/IP
or
Configuration> Basic Configuration> Network> TCP/IP
Figure 4-9 TCP/IP Settings
2. Select the NIC as WLAN.
3. Customize the IPv4 address, the IPv4 Subnet Mask and the Default
Gateway.
The setting procedure is the same with that of LAN.
If you want to be assigned the IP address you can check the check box to enable the
DHCP.