DVR systems IPC - Manual (Page 38)

Network Camera User’s Manual 37
Figure 6-4 Time Sync Manually
●Click the tab page to enable the DST function and Set the date of the
DST period.
Figure 6-5 DST Settings
2. Click to save the settings.
6.3 Configuring Network Settings
6.3.1 Configuring TCP/IP Settings
Purpose:
TCP/IP settings must be properly configured before you operate the camera over
network. The camera supports both the IPv4 and IPv6. Both versions may be
configured simultaneously without conflicting to each other, and at least one IP
version should be configured.
Steps:
1. Enter TCP/IP Settings interface:
Configuration > Basic Configuration > Network > TCP/IP
Or Configuration > Advanced Configuration > Network > TCP/IP