CANOGA PERKINS 9145ELB NID Software Version 4.01 - Manual (Page 73)

Port Information 9145ELB NID Software User’s Manual
Network Side Forwarding Configuration
63
5.3 Network Side Forwarding Configuration
From the Port Information screen (Figure 5-1), select Network Side Forwarding (3), and press
Enter. The Network Side Forwarding Configuration screen (Figure 5-10) opens.
1. To change the active Network Port interface for forwarding, press Enter. The screen now
allows you to toggle between values (Figure 5-10).
2. Press the Space bar to select Net1 or Net2 (Figure 5-11).
3. Press Enter to accept the change.
4. Press Esc to return to the Port Information screen.
Figure 5-10 Network Side Forwarding Configuration screen
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145ELB-971-4-0 V04.01 10:55:13
----------------------NETWORK SIDE FORWARDING CONFIGURATION---------------------
1) Active Network Port Interface: NET1
Press ENTER to start editing
------------------------------------Messages-----------------------------------