CANOGA PERKINS 9145ELB NID Software Version 4.01 - Manual (Page 52)

9145ELB NID Software User’s Manual System Configuration
Hardware Information
42
3.8 Hardware Information
The Hardware Information screen displays the model number, hardware revision level, serial
number, power supplies, and port information for the sixteen 9145ELB User Ports and two 10G
ports.
From the System Configuration menu, select Hardware Information (9) and press Enter. The
Hardware Information screen (Figure 3-25) opens.
To display more User Ports (Figure 3-26), type N and press Enter.
To go to a particular port, type G and press Enter. You are prompted to enter a port number in the
form: U1-16, 10G1, or 10G2.
NOTE: Parameters and values cannot be changed in this screen.
Figure 3-25 Hardware Information screen - 1 of 6
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
Model 9145ELB-B83-0 V04.01 10:55:1
-----------------------------------HARDWARE INFORMATION---------Display 1 of 6-
NID Model Number 9145ELB-971-4-0 Module Model Number 9420-302 10G
NID Hardware Rev. A1 Module Hardware Rev. A1
NID Serial Number 20110501177 Module Serial Number 20110501242
SFP Information User Port 1 User Port 2 User Port 3
Model Number SFP1-0045 SFP1-0045 SFP1-0045
Wavelength 850nm MM 81310nm SM N/A
Connector Type Duplex LC Duplex LC N/A
Data Rate 1000Mbps 1000Mbps N/A
Maximum Line Length N/A N/A N/A
Maximum Loss Budget N/A 10dB N/A
MAC address 00:40:2A:04:E5:83 00:40:2A:04:E5:84 00:40:2A:04:E5:85
Power Supply A AC 120/240 Fan Module Fans/4
Select [(N)ext, (G)oto], ESC to return to previous screen
----------------------------------Messages-------------------------------------