CANOGA PERKINS 9145ELB NID Software Version 4.01 - Manual (Page 19)

Getting Started 9145ELB NID Software User’s Manual
Main Menu
9
Figure 2-3 Main Menu
7. Software Upgrade The Software Upgrade screen is used to download and install new
firmware using TFTP, swap firmware banks, and reset the 9145ELB.
8. Manage Logged In Users The Manage Logged In Users screen is used by the
administrator to view current users, and to terminate user sessions when required.
9. CoS Configuration The Class of Service (CoS) Configuration menu is used to enable or
disable classification support, and to establish priority to queue mapping, set up queue
configuration, create drop profiles, and view queue statistics.
10. EVC Configuration The Ethernet Virtual Connection (EVC) Configuration menu is used
to configure VLAN Multiplexing.
11. Bandwidth Profile Enforcement The Bandwidth Profile Enforcement menu is used to
configure bandwidth profiles for traffic management.
12. Logout Logout terminates your current session.
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-20111
9145ELB-B83-M-0 V04.01 10:55:13
-------------------------------------MAIN MENU---------------------------------
1) System Configuration
2) Diagnostics
3) Port Information
4) System Alarms
5) System Log
6) Utilities
7) Software Upgrade
8) Manage Logged In Users
9) CoS Configuration
10) EVC Configuration
11) Bandwidth Profile Enforcement
12) Logout
Select [1-14]:
------------------------------------Messages-----------------------------------