Pilz PSEN op Protective Column 4-090/1 - Manual

1002909-EN-02
PSEN op Protective Column 2-4/1
Operating Manual
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany 1
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] Original document
General
PSEN op Protective Column 2-4/1 is a column made of aluminium
and a base plate made of steel. The base plate consists of 2 plates
that can be adapted to the ground.
Deviation mirrors are already installed in the protective column.
They can be aligned independently of each other.
Overview
Features
 Protects the installed deviation mirrors from accidental shock and
collisions.
 One-piece profile made of coated aluminium with various lengths,
matching all height of PSEN op 2/4B (500 – 1200 mm).
 Robust base plate consists of 2 plates, with pins for
compensating unevenness (levelling) and slot holes for angular
adjustment.
 Spherical spirit level for easier level alignment.
Typical application areas
The accessories of PSEN op Protective Column 2-4/1 are
particularly suited for environments where vehicles such as forklifts
or automated guided vehicles can move freely.