beautypg.com

Garmin GPS 120 User Manual

Page 59

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

To flush m ount the G PS 120:

The GPS 120 can be mounted flush with a flat

panel of .08- 52” thickness using the cam lobe feature

on its mounting bracket,

I. C ut a 4.15" W X 4.67" H hole in panel.

1

Place G PS 120 into hole from the front until its flange rests against

the m ounting surface.

3. From the back side of the panel, loosely attach

the bracket such that the slot in the ratchet area

points aw ay from the m ounting panel.

4. Rotate the bracket (tow nw ard until the panel

is pinched tightly betw een the the units flange

and bracket lobe.

5. Tighten knobs and connect the pow er/data

and antenna cables.

To sw ivel m ount the G PS 120 (w ith optional sw ivel m ount bracket):

1. Place the sw ivel m ount bracketin the desired

location.

2. M ark and dnil the three m ounting holes for the

fasteners you are using.

3. Fasten the bracket to the surface using the

appropriate fasteners.

4. Place the m ounting bracket on top of the sw ivel

m ount bracket, and secure using the knob included

w ith the sw ivel m ount kit Insert the G PS 120 into

the m ounting bracket.

5. Screw the tw o m ounting knobsthroughthe bracket and into the G P S 120.

C onnect the pow er/data and antenna cables to the back of the unit

51