Garmin GPS 120 - Manual (Page 46)

Opi’iatiim
SL’lnp
OPERftTIOH SETUP
NODE:
Horinal?
DftTE
18 JftN 9-i|
Т1ПЕ
18:30:08
OFFSET: +0^:00
CONTRAST:
BACKLIGHT TINE:
30 seconds
tone : MSG Only
OPERATION SETUP
NODE:
Normal
BATE
18 JftN BA
TINE
12:31:28
OFFSET! +ИИ:ИИ
CONTRAST:
BACKLIGHT TINE:
30 seconds
TONE!
MSG Only
OPERATION SETUP
nOBE:
Normal
» ate
18 JAN BA
ТШ
12:3
l:dd
OFFSET: -0gl00
CONTRAST:
BACKLIGHT TINE:
30 seconds
tone : MSG Only
The remaining submenu seleciions on the Menu
Page are grouped together as setup pages. The first
setup page is the operation setup page, which is
used to select the operating mode, time offset and
screen and tone preferences.
The GPS 120 has three available operating
modes;
Normal Mode operates the unit with satel­
lite information and is the mode the unit will
usually be operating.
Simulator Mode allows you to operate the
unit without acquiring satellites, and is ideal
for practicing or entering waypoints and
routes while at home.
AutoLocate™ Mode forces the receiver to
search for a new set of satellites in situations
where you have moved more than 300 miles
from the unit’s last known position.
To select an operating mode:
1. M ove the field highlight to the 'm ode'field and
press then key.
2. U se the ▲ and
m ode and press I
' keys to choose the desired
The date and time field is located directly helow
the mode field. The date and time are calculated
from satellites and cannot be edited. Because the
time shown is UTC time, you will need to enter a
time offset to display the correct local time for
your area. To determine the time offset for your
area, note your current position and refer to the
chart on appendix E. To enter the time oflkt:
V M ove the field highlight to the 'offsef field and
press the key.
2. Enter the tim e offset for your longitude and press
gg. R em em ber to select a positive or negative
indicator foryour offset
38