Garmin GPS 120 - Manual (Page 38)

Clt’flrifig and
iimiii’s
FiOUTE: 1
ftOtK TO DIME
NO UflVPNT PTK MS
l.DOOK isg-g g
a.FUEL
\ l l l l
3. FISH
4. DIME
5_______ ___
E..... ......
7----------------------
COFY TO ROUTE! __
IHU-i ACT?
OLEAR ROUTE
HARHIHG!
till Uroiypoihts
will be removed
•from "this route
fire you sure
or Ho?
ROUTE! 1
POOK TO PIPE
NO HAVFHT PTK PIS
l.DOCK
a.FUEL
W il l
3. FISH
4. DIUE
™ “
5____
E____
7_____
COPY TO ROUTE! „
OLRf IHUY
To clear a route from memory:
1. Press to begin entry of the route num ber.
2. Enter the route num ber and press Q .
3. Select the 'clear'field and press
The clear route warning will appear, asking you
to confirm that you warn to remove all waypoints
from the route.
1. H ighlightthe'yes'field w ith the
i
key.
2. Press B to confirm your action.
3. Press to return to the M enu Page.
After a route has been entered in the GPS 120, it
can be activated in its defined sequence or invert­
ed from the route definition page. The process of
activating or inverting a stored route takes a stor­
age route (routes 1-19) and copies it into the active
route (route 0) for navigation. The storage route is
now no longer needed and will be retained in its
original format under its existing route number
This system allows you to have an active route
that you may edit during navigation and save as an
entirely new route from the original. You will have
to copy the active route to an unused storage route
to save it, since new route activation overwrites
route 0. To activate a route:
1. Select the route definition page and press the
key to activate the route num ber field.
2. Enter the route num ber to be activated and
press the B key.
3. M ove the field highiight to the 'act' field and
presses.
Inverting a route allows you to navigate route
legs in reverse order, without editing the original
route. To activate a route in inverted order:
1. Follow the sam e steps as above, but select the
W com m and field and press the key.
30