Garmin GPS 120 - Manual (Page 58)

Monnting the GPS 120 unit
The GARMIN GPS 120^ compact, wateqjroof case is suitable for mounting in
exposed locations or at the nav station. The unit comes with a gimba) bracket
that can be used for surface, overhead, or flush mounting. When choosing a
location for the display unit, make sure you consider the following conditions;
• There should be at least 2.00” {5,0 cm) clearance behind the case to allow
connection of the antenna and power/data cables.
• The mounting surface should be rigid enough to support the unit and
protect it from excessive vibration and shock.
• The GPS 120 screen will provide crisp contrast in most lighting conditions,
even in full sunlight.
To sur^ce mount the GPS 120:
1. Place the m ounting bracket in the desired
location.
2. M ark and drill the four m ounting holes forthe
fasteners you are using. N ote; The hole pattern
is com patible w ith Johnny R ay JR -400 sw ivel
m ount
3.
Fasten the bracket to the surface using the
appropriate fasteners.
4. Insert the G PS 120 into the m ounting bracket
5. Screw the tw o m ounting knobs through the bracket and into the G P S 120.
6. C onnect the pow er/data and antenna cables to the back of the unit, m aking sure
the locking rings are fully tightened on both connectors.
50