Garmin GPS 120 - Manual (Page 56)

OPEROTlOtt SET«f
HODE:
Bimultitor?
MTE
18 JAH 94
TIKE
06:40:29
»FFfET:
-06:06
ttHTRKST:
MCKLIGHT TIKE:
30 seconds
TONE!
MSG Only
1 1 1 1 M 1 1 M M 1 1 1 1 1 1 M l
34S N 015 030
IjjJjjj^JVujJjjjjJjjJ
TRACK STEED
006^ [10.0^
F4SITICN
N 25^05.180*
W 077^21.118*
ALTITUDE
425fT i 74fT
TIKE
10:47:04
006* 10.0’V
FDSITIDH
Bl 25*05.180‘
W 077*21.113'
ALTITUDE
425^ i 74^
TIKE
10:47:22
The GPS 120’s simulator mode lets you practice
all aspects of its operation without active satellite
acquisition. You can also plan and practice trips,
enter new waypoints and routes and save them for
use during normal operation.
The simulator mode is activated from the Menu
Page, with vessel speed and heading controlled
from the Position or Navigation Pages. To activate
the simulator mode:
1. From the M enu Page, highlight the 'm ode' held
and press the n key.
2. Use the ▲ or 'V'keys to scroll through and
select the sim ulator m ode.
3. Press the Q key to confirm sim ulator m ode.
4. Press to return to the M enu Page.
Once the simulator mode has been activated,
use the Position or Navigation Page to set your
speed and track. You may also enter a new posi­
tion if you desire (only from the Position Page). To
enter track, speed and position:
1. H ighlight the 'track'field and press the |
2. Enter a track heading and press
1. H ighlight the 'speed' field and press fy
2, Enter a speed and press
1. H ighlight the 'position' field and press ^
1
Enter a position and press the key.
I
key.
A-
The
GPS 120 does not track satellites in simulator
mode. Although you cai\ create and save
ivey-
points
and routes wtnle using the simulator mode,
never ertem pt
to use tiie simulator mode for
actual navigation. The GPS 120 will always power
up in the last selected satellite mode.
48