Welch Allyn Connex Central Station - User Manual - Manual (Page 78)

Edit a device
1. Click Edit.
The list of available devices is active.
2. Click on a device.
Note You cannot select a device that is actively monitoring a
patient.
3. Use the pull-down menu under Location to select a unit, room, or bed.
You can also check the Is Bolted box to permanently assign the device to the
location.
4. Review your changes, and if correct, click Save.
A confirmation window appears.
5. Click Cancel to return the Device tab to an inactive screen.
72 Settings Welch Allyn Connex ® Central Station