Welch Allyn Connex Central Station - User Manual - Manual (Page 23)

Connectivity tiles
Signal lost
This tile is displayed when the device has been unintentionally disconnected from the
central station. For information on reconnecting the device to the central station, see the
device directions for use.
Standby
This tile is displayed when continuous monitoring has been paused at the device. For
information on how to resume continuous monitoring, see the device directions for use.
Temporarily disconnected
This tile is displayed when the device has been intentionally disconnected from the
central station. If reasons for disconnecting from the central station have been
configured, the reason appears under the Temporarily disconnected message. For
more information, see the device directions for use.
Directions for use Screen elements 17