Welch Allyn Connex Central Station - User Manual - Manual (Page 50)

Select a tile layout
1. Click the Views icon on the Main Monitoring screen.
The Views Configuration window appears.
2. Select the layout you wish to use and click Select.
The Main Monitoring screen appears in the selected layout.
Create a custom tile layout
The central station supports up to 10 custom tile layouts.
1. Click the Views icon on the Main Monitoring screen.
The Views Configuration window appears.
2. Click the View Configuration tab.
3. Click Add.
The Add/Edit a View screen appears.
4. Enter a name for the layout.
5. Select the number of patient tiles the layout will display.
Patient tiles can be displayed in 8-, 12-, 24-, 36-, or 48-tile grids.
6. Select the way in which the patient tiles will be organized.
There are three modes in which tiles can be organized:
•
Automatically sorted. Patient tiles are sorted automatically. There is no further
customization.
• Manually placed in a tile location. Patient tiles can flow in either a column
direction - top down then left to right, or a row direction - left to right then top
down.
• Mapped by patient location. Patient tiles are mapped on a grid. Click on an
unassigned tile to assign the highlighted room number to that location. Click on
the assigned tile to remove it from that location.
7. Select any of the tile customizations you want to apply to your layout.
8. Click Save.
The Main Monitoring screen appears in the new layout.
44 Views Welch Allyn Connex ® Central Station