Welch Allyn TM 262 Auto Tymp - User Manual - Manual (Page 74)

TM 262
5-8 Revised 4/11/08
263 4 uint Reflex #1
Recovery [5] Reflex recovery compliance data point #5 of
6measured after the stimulus is turned off, in cc X
256,Bit 15 = Noise indicator0 = Quiet data
measurement1 = Noisy data measurement,
potentially unreliable. The recovery points #5 and
#6 are only included when the recovery is slow and
there was no recovery according to the first four
recovery data points. If not included, their values
will be 0.
267 asst Reflex #2 See Reflex #1 format.
317 asst Reflex #3 See Reflex #1 format.
367 asst Reflex #4 See Reflex #1 format.
417 2 uChar Checksum The hexadecimal sum of characters 1 to 416
419 2 ASCII Package
Terminator
“CR, “LF”
Character
Number
Number of
Characters
Data
Type
Field Name Field Description