Vinten Radamec SP-2000 Pedestal - Manual (Page 62)

SP-2000/X-Y Installation
3-22 User Manual
Removing The Payload
WARNING: ALWAYS lower the column to its minimum
height, power down the pedestal and install the locking pins
before removing all or part of the payload. Or, discharge the
pressure in the pedestal (see Discharging The Pedestal ear-
lier in this chapter). This will prevent column from rising
unexpectedly and causing injury and/or damage.
CAUTION: NEVER try to raise or lower the column if the
locking pins are installed, You will cause serious mechanical
and/or electrical damage.
Refer to the documentation for the payload equipment and the User Manual for
the pan/tilt head for specific instructions.