Vinten Radamec SP-2000 Pedestal - Manual (Page 32)

SP-2000/X-Y Operation
2-4 User Manual
Powering Up The SP-2000/X-Y
A relay latching circuit ensures that if power is lost (even momentarily) the ped-
estal cannot restart automatically - it must be powered up manually.
1. Before you power up a pedestal, first make sure that the head is turned off,
the MCB controller is in Remote and the area around the pedestal is clear.
Warning: At power up, the column (and payload) will drop to
a low level for a few seconds. Make sure that nobody will be
hit by any part of the payload.
Standby/Charge Run Stop