beautypg.com

Rice Lake DWM-IV Weighmeter Standard Operators Manual User Manual

Page 32

background image

FSE F3

F3.0 Baud Rate Selection X100

Select the desired BAUD rate according to the chart. Older DDO boards have a limited

rating on the current loop ports of 1200 BAUD. If Continuous Data output is selected,

BAUD rate should be 2400 or greater.

Choices: 192, 96, 48, 24, 12, 6, 3, 1.5

F3.1 Parity Selection

d - 7 Bits, No Parity.

1 - 7 Bits, Even Parity.

2 - 7 Bits, Odd Parity.

8b - 8 Bits, No Parity.

8be - 8 Bits, Even Parity.

8bo - 8 Bits, Odd Parity.

F3.2 Checksum Transmit Enable

d - No checksum

E - Checksum transmitted, prior to CR-LF, as the 2’s compliment of previously sent

characters.

F3.3 Delay After CR-LF

The amount of delay, after a carriage return or line feed is transmitted, in seconds.

Choices: 0, 0.1, 0.2, 0.5, 0.75, 1.0, 1.5

F3.4 Consecutive Number Print Enable

d - Disable the printing of the CN.

E - Enable the printing of the CN.

Page 30

See also other documents in the category Rice Lake Scales: