Rice Lake DWM-IV Weighmeter Standard Operators Manual - Manual (Page 15)

Front Panel Data Entry
Select the desired function from the examples given below. Then press
the buttons in the order shown from left to right. The following
symbols are used to indicate numeric button entry which may be
comprised of multiple numeric entries.
The dotted line symbol indicates that numeric entry at this point in the
sequence is not required unless the data are to be changed.
FUNCTION 0: TEST all display segments.
FUNCTION 1: PRESET entry of weight values. Two speed feed
enabled.
Preset
0
Preset 1 Preset 2
Preset
3
FUNCTION 1: PRESET entry of weight values. Single speed feed
enabled.
Preset
0
Preset 1
Preset
2-5
Preset
6
Page 13