Rice Lake 920i Installation Manual V4.01 - Manual (Page 72)

66 920i Installation Manual
6.4.2 Using the Front Panel
If you have no access to equipment for communication through a serial port or are working at a site where such
equipment cannot be used, you can use the PFORMT menu (see Figure 6-2 on page 66) to customize the print
formats.
SCALES SERIAL FEATURE PFORMT SETPTS DIG I/O VERS
GFMT NFMT ACCFMT SPFMT TRWIN TRWOUT TRFMT
See GFMT Menus
PORT FMT
format
HDRFMT1 HDRFMT2
format format
ALERT
Default port for ALERT
format is PORT 1
SERV
Alert email
server
PHONE
Alert modem
phone
ALERT format ONLY
AUDITFMT
PORT
AUXFMT
Same as AUXFMT1
AUXFMT1 AUXFMT20
PORT 1
None
PORT FMT1
format
...
PORT 3
PORT 2
PORT 4
PORT 1
None
PORT 3
PORT 2
PORT 4
PORT 1
None
PORT 3
PORT 2
PORT 4
Figure 6-2. PFORMT Menu
Each print format can be edited from the front panel using a character selection like that shown in Figure 6-3.
Use the navigation keys (
up , down , left , right ) to move around and between the format command line and the
character selection list.
Figure 6-3. Print Formatting Character Selection Display