Rice Lake 920i Installation Manual V4.01 - Manual (Page 11)

Introduction 5
Option Cards
Table 1-4 lists the available 920i option cards. Any of
the listed option cards can be installed in Slot 2 of the
CPU board or in any available slot of an attached
expansion board.
Table 1-4. Part Numbers for 920i Option Cards
Option Card PN
Single-channel A/D card 68532
Dual-channel A/D card 68533
Single-channel analog output card 67602
Dual-channel analog output card 103138
Dual serial port expansion card 67604
24-channel digital I/O expansion card 67601
1MB NV RAM memory expansion card 67600
Pulse input card 67603
Ethernet communications card 71986
EtherNet/IP interface card 87803
DeviceNet interface card 68541
Allen-Bradley Remote I/O interface card 68539
Profibus DP interface card 68540
ControlNet interface card 103136
Analog input card with thermocouple input 87697
Expansion Boards
Table 1-5 lists the expansion boards available for the
panel mount and wall mount enclosures. The panel
mount enclosure can accommodate a single 2-card
expansion board; the wall mount enclosure supports
either a 2-card or a 6-card expansion board. Any of
the available option cards can be installed in any
available expansion board slot.
A second two- or six-card expansion board can also be
connected to the
920i , providing up to 14 option card
slots. Consult factory for details. See Section 2.5 on
page 14 for detailed information about slot and serial
port assignments for expanded system configurations.
Table 1-5. Part Numbers for 920i Expansion Boards
Expansion Board PN
Two-card expansion board for panel mount
enclosure, slots 3–4. Includes 2-inch, 34-pin
ribbon cable and power supply cable. 71743
Two-card expansion board for wall mount
enclosure, slots 3–4. Includes 24-inch, 34-pin
ribbon cable and power supply cable. 69782
Six-card expansion board for wall mount
enclosure, slots 3–8. Includes 16-inch, 34-pin
ribbon cable and power supply cable. 69783
Relay Options
8-, 16-, and 24-channel relay racks are available for all
920i systems. Relays can be installed internally in the
wall mount enclosure; all other models require an
external enclosure for the relays. Consult factory for
details.
DC Power Supplies
Two DC power supplies are available for mobile 920i
applications:
PN 97474, 9–36 VDC supply
PN 99480, 10–60 VDC supply
Consult factory for more information.
Outdoor Display
An optional display, PN 100759, is available for
applications requiring use of the
920i in bright, sunlit
environments. Consult factory for details.
1.6 Summary of Changes
Changes to recent editions of this manual are listed
below:
Version 4.01
• HWSUPPORT returns (see Section 9.1.2 on
page 90).
• The new CPU board (PN 109549) was
d e s i g n e d t o t a k e a d v a n t a g e o f n e w e r
technology and eliminate any parts that are at
Wall mount model, 230 VAC, North American, NEMA 15-5 power cord 69765 69776
Wall mount model, 230 VAC, European, CEE 7/7 power cord 72133 72134
Model designations shown on indicator serial tags include a suffix (xy) that describes the enclosure type (x) and power input (y).
Codes used for this suffix are as follows:
x: 1 = Desktop; 2 = Universal; 3 = Wall mount; 4 = Panel mount; 5 = Deep enclosure
y: A = 115 VAC; B = 230 VAC; C = 9–36 VDC; D = 10–60 VDC
System Model
Model PNs
Single-Channel A/D Dual-Channel A/D
Table 1-3. Part Numbers for 920i Models