Rice Lake 920i Installation Manual V4.01 - Manual (Page 71)

Print Formatting 65
6.4 Customizing Print Formats
The following sections describe procedures for customizing print formats using the iRev 4 configuration utility,
serial commands, or the front panel (PFORMT menu. See Section 10.6 on page 112 for information about
custom stream formatting.
6.4.1 Using iRev
The iRev 4 configuration utility provides a ticket formatting grid with a tool bar. The grid allows you to construct
the ticket format without using the formatting commands ( and ) required by the front panel or serial
command methods. Using
iRev 4 , you can type text directly into the grid, then select weight value fields from the
tool bar and place them where you want them to appear on the printed ticket.
Figure 6-1 shows an example of the iRev 4 print formatting display.
Figure 6-1. iRev Print Formatting Display
ALERT Alert message is sent to specified port when
error indication is generated by an attached
iQUBE 2 . See the iQUBE 2 Installation Manual,
PN 106113, for more information.
HDRFMT1
HDRFMT2 COMPANY NAMESTREET ADDRESS
CITY, ST ZIP Must be inserted into other print format
AUXFMTxx GROSS Formats AUX1FMT—AUX20FMT
AUDITFMT Fixed format; cannot be edited Press PRINT when audit trail is displayed, or in
response to a DUMPAUDIT serial command.
NOTES: In OIML and CANADA modes, the letters PT (preset tare) are automatically inserted after the printed tare weight. When using Version 3
of iRev with older indicator software, the single auxiliary format (AUXFMT) is handled as AUXFMT1.
Format Default Format String Used When
Table 6-3. Default Print Formats