Rice Lake 920i Installation Manual V4.01 - Manual (Page 68)

62 920i Installation Manual
6.0 Print Formatting
The 920i provides print formats that determine the format of the printed output when the PRINT key is pressed, a
KPRINT serial command is received, or when setpoint push-print or truck weigh-in or weigh-out operations are
performed. Supported print formats are: GFMT, NFMT, ACCFMT, SPFMT, TRWIN, TRWOUT, ALERT,
AUXFMT1—AUXFMT20, and AUDITFMT. Additionally, two header formats, HDRFMT1 and HDRFMT2,
can be inserted into any of the other ticket formats using the
Each print format can be customized to include up to 1000 characters of information, such as company name and
address, on printed tickets. You can use the
iRev 4 ™ configuration utility, serial commands, or the indicator front
panel (PFORMT menu) to customize the print formats.
6.1 Print Formatting Commands
Table 6-1 lists commands you can use to format the 920i print formats. Commands included in the format strings
must be enclosed between < and > delimiters. Any characters outside of the delimiters are printed as text on the
ticket. Text characters can include any ASCII character that can be printed by the output device.
Command Description Supported Ticket Formats
General Weight Data Commands
Gross weight, current scale GFMT, NFMT, TRWIN. TRWOUT, ACCFMT,
AUXFMTxx, ALERT
n> Gross weight, scale n
Net weight, current scale
n> Net weight, scale n
Tare weight, current scale
n> Tare weight, scale n
Current scale number
NOTES:
Gross, net, tare, accumulator, truck, and setpoint weights can be printed in any configured weight units by adding the following
modifiers to the gross, net, and tare weight commands: /P (primary units), /D (displayed units), /S (secondary units), /T (tertiary
units). If not specified, the current displayed units (/D) is assumed. Example: To format a ticket to show net weight for Scale #3
in secondary units, use the following command:
Formatted weight strings contain a 10-digit weight field (including sign and decimal point, with leading zeroes suppressed),
followed by a space and a two-digit units identifier. Total field length with units identifier is 12 (or 13) characters.
Accumulator Commands
Accumulated weight, current scale GFMT, NFMT, ACCFMT, AUXFMTxx
n> Accumulated weight, scale n
Average accumulation, current scale
n> Average accumulation, scale n
Number of accumulations, current scale
n> Number of accumulations, scale n
Time of last accumulation, current scale
n> Time of last accumulation, scale n
Date of last accumulation, current scale
#n> Date of last accumulation, scale n


Table 6-1. Print Format Commands