Rice Lake 920i Installation Manual V4.01 - Manual (Page 50)

44 920i Installation Manual
SPPWD 0
0–9999999 Setpoint password. Specify a non-zero value to restrict access to the setpoint menu.
The SPPWD is also shared by, and can be used to protect, the truck register. If a non-zero
setpoint password is specified, the password must be entered before deleting any entries
from the truck register.
CONTRAST 0-127 Adjusts the display contrast level. For front panel adjustment, the Contrast softkey can be
added.
SOFTKEYS
Time/Date
Display Tare
Display Accum
Display ROC
Setpoint
Batch Start
Batch Stop
Batch Pause
Batch Reset
Weigh In
Weigh Out
Truck Regs
Unit ID
Select Scale
Alibi
Diagnostics
Contrast
Test
Stop
Go
Off
Screen
F1–F10 Use the Add and Remove softkeys to select softkeys to be displayed in weighing mode.
KYBDLK OFF
ON Keyboard lock. Specify ON to disable the keypad in normal mode.
ZERONLY OFF
ON Zero key only. Specify ON to disable all front panel keys except ZERO in normal mode.
PROMPTS PROMPT1–
PROMPT60 Specify prompts for use in setpoint names. Prompts are referenced by the NAME parameter
under the SETPTS submenus; prompts can be shown on the display during setpoint
execution.
FEATURE Menu
Parameter Choices Description
Table 3-7. FEATURE Menu Parameters (Continued)