Mercedes-Benz C-Class 2010 COMAND Manual - Manual (Page 52)

in that area for the route calculation, for
example.
The message Navigation Unavailable will
then be displayed.
X To delete message: Switch COMAND off
and back on again.
i After switching on/off, the navigation
system will remain functional until it has to
access the faulty area of the hard drive
again. The message will be displayed again.
Contact a Mercedes-Benz service center.
Measurement Units
The measurement units displayed in
navigation mode are identical to those set in
the instrument cluster.
Input Restriction
There is an input restriction for vehicles for
certain countries.
The restriction is active for vehicle speeds
above apprx. 3 mph. The restriction is
deactivated as soon as the speed falls below
apprx. 2 mph.
Certain entries cannot be made when the
restriction is active, e.g. a city or road entry.
This is indicated by the fact that certain menu
items cannot be selected.
Menu Overview
Navi
Selecting map display
Setting route calculation mode
Setting Block Area
Save Off-road Route
Selecting information on map
Switching highway information on/off
Switching Audio Fadeout on/off
50
Introduction
Navigation