Mercedes-Benz C-Class 2010 COMAND Manual - Manual (Page 39)

X To set the brightness: Rotate y m z or
slide q m r .
The brightness bar moves up or down.
X To confirm selection: Press n or slide
o m.
or
X Press the k button.
Setting the Display Design
X Select System£Settings£Display.
X Select Day mode, Night mode or
Automatic.
The R dot indicates the current setting.
i In the Automatic setting, COMAND
evaluates the readings from the automatic
vehicle light sensor and switches between
the display designs automatically.
Time
Setting the Time
i The correct time must be set for the
following navigation system functions to
operate correctly:
R
Calculation of expected time of arrival
R
Time stamps for calls received and calls
dialed
X Select System£System Settings£
Time£Set Time.
1 Sets the time
2
Current date
X To set value: Rotate y m z or slide q m r .
X To save setting: Press n.
i If you adjust the time in 30-minute
increments, the previously selected time
zone and automatic time-zone switching
between daylight saving time and standard
time settings are lost (
Y page 38).
i The increment value for setting the
minutes depends on the equipment
installed. They are 30-minute increments in
vehicles equipped with a navigation
system. They are minute increments in
vehicles without a navigation system. The
following operational steps depend on
whether the navigation system has GPS
reception.
Setting the Date/Time Format
X Select System£System settings
£Time£Format.
The format list appears. The R dots show
the current settings.
i The abbreviations mean:
Date format: DD - Day, MM - Month, YY/
YYYY - Year
Time format: HH - Hour, MM - Minute for
either 24-hour clock or AM/PM format
Time
37
System Settings
Z