Navi gati on, Destination input – Mercedes-Benz C-Sedan 2015 COMAND Manual User Manual

Page 78

To select a destination: press the con-

troller.

The list contains the

menu item. If

there are multiple destinations around the

crosshair, a selection list will also appear.

To show the menu: press the controller.

To select a destination from the selection

list: turn and press the controller.

If the digital map provides navigable

address data, you will see the destination

address in the address entry menu. If not,

the

Destination from Map, Date_1,

Time_1

entry is shown.

To start route calculation: select

Start

Entering way points

Introduction

You can also map the route to the destination

yourself by entering up to four way points. The

sequence of the way points can be changed

at any time.
COMAND provides a selection of predefined

destinations in eight categories for this pur-

pose, e.g.

GAS STATION

RESTAURANT

. You

can also use the destination entry options to

enter way points.

Creating way points

To switch to navigation mode: press the

Ø button.

To show the menu: slide 6 the control-

ler.

To select

Destination

: turn and press the

controller.

Select

Way Points

The destination is entered into the way

points menu. The way points are not yet

entered.

To select

Add New:

: press the controller.

To select a category or

Other

: turn and

press the controller.

After selecting a category, the POIs which

are available along the route and in the

vicinity are displayed.
COMAND first searches for destinations

along the route. The search for destinations

is then initiated in the area around the vehi-

cle position.

After selecting

Other

, select one of the

destination entry options from the list.

Destination input

Navi

gati