Mercedes-Benz C-Sedan 2015 COMAND Manual - Manual (Page 192)

X To select Options Options in the menu bar: slide
V¬ and press the controller.
A menu appears. You can set Mono/ Mono/
Stereo Stereo and Volume Volume .
Mono/stereo:
X To select Mono/Stereo Mono/Stereo : turn and press the
controller.
A menu appears.
X Select Mono Mono or Stereo Stereo .
The # dot indicates the current setting.
Volume:
X To select Volume Volume : turn and press the con-
troller.
X Select Standard Standard or Boost Boost .
Standard Standard : the volume of the external audio
source is adjusted to a standard value.
Boost Boost : the volume of the external audio
source is raised by approximately 10 dB.
The # dot indicates the current setting.
A device which is connected as an external
audio source may seem quieter or louder in
the vehicle, or the usual maximum volume
cannot be achieved. On some devices, it is
possible to adjust the volume separately. In
this case, start at a medium volume and
increase it gradually. This enables you to
determine whether the system is able to play
the music at high volume without distorting
it.
Video AUX mode
Connecting external video sources
G WARNING
External video sources may have different vol-
umes, which can mean that system messages
such as traffic announcements and navigation
system announcements are much louder. If
necessary, please deactivate the system mes-
sages or adjust their volume manually.
Video AUX is another option for showing vid-
eos using COMAND.
To connect an external video source to the
video AUX, you will require a video AUX cable.
i If you only use an audio AUX cable, you
will only be able to hear the sound from the
video being played.
Videos cannot be shown on the driver's
side while the vehicle is in motion.
Switching to AUX video mode
X Connect the external video source.
The socket for the video AUX jack is located
in the stowage compartment in the center
console.
The video AUX is not selected automati-
cally.
X
Press the Õ button.
The menu for the last accessed media
source appears.
X To select Media Media from the main function bar:
turn and press the controller.
You will see the menu.
X Select Aux Aux .
The AUX video menu appears.
X To select Audio/Video Audio/Video in the menu bar:
slide V¬ and press the controller.
A Source Type Selection Source Type Selection menu
appears.
X Select Video Video .
The # dot indicates the current setting.
If the video source is connected and play-
back selected, the image from the external
video source will appear if Video Video is
selected.
Please see the corresponding device operat-
ing instructions for information on how to
operate the external video source.
Information about sound settings
(
Y
page 200)
190
Video AUX mode
Media