Mercedes-Benz C-Sedan 2015 COMAND Manual - Manual (Page 77)

Selecting a point of interest
Requirement for "Calling a POI": a mobile
phone is connected to COMAND
(
Y
page 104).
Requirements for "Viewing the vicinity of the
destination" and "Loading data from the Inter-
net": mbrace must be activated for Internet
access (
Y
page 136).
The complete address of the POI is shown.
Viewing the vicinity of the destination
X
To select symbol :: turn the controller and
press to confirm.
If street images are available, the street in
the vicinity of the destination address is
shown.
Calling up the map
X Select Map Map .
X Move the map, change the map scale and
select the POI (
Y
page 75).
Calling up the POI
X Select Call Call .
If a telephone number is available,
COMAND switches to the telephone func-
tion.
Loading data from the Internet
X Select www www .
If an Internet address is available, data is
loaded from the Internet.
Saving a POI
X To select Save Save : turn and press the control-
ler.
The POI can be saved as:
R a navigable contact in the address book
R My Address
Starting route calculation
X To select Continue Continue : press the controller.
Using Map
: Crosshair
; Distance of crosshair position from cur-
rent vehicle position
X To switch to navigation mode: press the
ß button.
X To show the menu: slide 6 the control-
ler.
X To select Destination Destination : turn and press the
controller.
X Select Using Map Using Map .
The map with crosshair is shown.
X To move the map: slide 1, 4 or
2 the controller.
X To change the map scale: turn the con-
troller until the desired map scale is
selected.
The scale is displayed at the bottom. Turn-
ing clockwise zooms out from the map;
turning counter-clockwise zooms in.
Destination input
75
Navigation
Z