Mercedes-Benz C-Sedan 2015 COMAND Manual - Manual (Page 39)

Time settings
General information
The following navigation system functions
require the time, time zone and summer/
standard time to be set correctly in order to
work properly:
R route guidance on routes with time-
dependent traffic guidance
R calculation of expected time of arrival
Setting the time and date format
With this function, you can set the time for
every display in the vehicle.
X Press the Ø button.
The Vehicle Vehicle menu appears.
X To select Time Time : slide 6 the controller,
turn and press to confirm.
A menu appears.
X To select Format Format : turn and press the con-
troller.
The # dot indicates the current setting.
X To select the desired format: turn and press
the controller.
Abbreviation Meaning
YYYY/MM/DD YYYY/MM/DD Year/Month/Day
date format, year (all
four digits)
YY/MM/DD YY/MM/DD Year/Month/Day
date format, year
(two digits)
MM/DD/YYYY MM/DD/YYYY Month/Day/Year
date format, year (all
four digits)
DD.MM.YYYY DD.MM.YYYY Day.Month.Year
date format, year (all
four digits)
DD/MM/YYYY DD/MM/YYYY Day/Month/Year
date format, year (all
four digits)
Abbreviation Meaning
HH:MM (24 hrs) HH:MM (24 hrs) Hours : Minutes
(24 hour time for-
mat)
HH:MM (AM/PM) HH:MM (AM/PM) Hours : Minutes
(AM/PM time for-
mat)
Switching automatic time on and off
This function is used to activate or deactivate
automatic changeover of time zone and
summer/standard time. The changeover to
summer time advances the time by one hour.
The automatic time setting is activated at the
factory. This function is only available in vehi-
cles with GPS reception and in certain time
zones.
X
Press the Ø button.
X To select Time Time : slide 6 the controller,
turn and press to confirm.
A menu appears.
X To select Automatic Time Settings Automatic Time Settings :
press the controller.
Checking the box switches the function on
O or off ª.
To switch on: the menu item is switched
on as the default setting. If Automatic Automatic
Time Settings Time Settings is reactivated, the previ-
ous settings for time zone and summer
time changeover are selected.
X To select Yes Yes or No No : turn and press the con-
troller.
If you select Yes Yes the settings will not be
changed.
If you select
No No the settings will be switched
Off Off .
The Time Zone: Time Zone: function is activated.
i You can set the time manually using For‐ For‐
mat mat and Set Time Manually Set Time Manually .
When there is GPS reception, COMAND sets
the time and date automatically.
Time settings
37
Sys
tem
se
ttin
gs