Mercedes-Benz C-Sedan 2015 COMAND Manual - Manual (Page 55)

For further information on the 360° camera,
see the separate vehicle Operator's Manual.
Settings for the 360° camera
When you activate this function, the image
from the 360° camera is displayed when you
select reverse gear.
Activating/deactivating using the reverse
gear:
X Press the Ø button in the center con-
sole.
The vehicle menu is displayed.
X To switch to the menu bar: slide 6 the
controller.
X To select Vehicle Vehicle Settings Settings : turn the con-
troller and press to confirm.
X Select 360° Camera 360° Camera .
X Select Activation by R gear Activation by R gear .
The function is switched on O or off ª,
depending on the previous status.
Displaying the 360° camera image
The 360° camera image can be displayed if:
R your vehicle is equipped with a 360° cam-
era
R COMAND is switched on (
Y
page 26)
R the 360° Camera 360° Camera function is switched on.
Displaying the image of the 360° camera:
X Press the Ø button in the center con-
sole.
A menu appears.
X Select 360° Camera 360° Camera .
The 360° camera image appears in split-
screen mode.
You will see the previous view on the display
if you have switched the function on:
R select transmission position P
R the vehicle exceeds a speed of approx.
30 km/h
Manually switching the display
X To select &: slide 6 and press the con-
troller.
Automatically switching the display:
X You can automatically switch the 360 cam-
era display using reverse gear (
Y
page 52).
The 360° camera can detect both moving and
stationary objects. If, for example, a pedes-
trian or another vehicle is detected, these
objects are marked with bars. The system is
only able to detect and mark stationary
objects when your vehicle is moving. By con-
trast, stationary objects will always be
detected and marked.
Switching object detection on/off
X To select Object Detection Object Detection in the 360°
camera menu: turn the controller and press
to confirm.
The function is switched on O or off ª,
depending on the previous status.
Opening the camera cover for cleaning
X To select Open Open Camera Camera Cover Cover in the 360°
camera menu: turn the controller and press
to confirm.
The Please Please Wait... Wait... message appears for
approximately three seconds.
The camera cover opens. The camera cover
closes automatically when you lock the
vehicle or pull away.
Rear view camera
The rear view camera is only an aid. It is not
a replacement for your attention to your
immediate surroundings. You are always
responsible for safe maneuvering and park-
ing. When maneuvering or parking, make sure
that there are no persons, animals or objects
in the area in which you are maneuvering.
Rear view camera
53
Vehi
cle
func
tio
ns