System settings, Reset function – Mercedes-Benz C-Sedan 2015 COMAND Manual User Manual
Page 46
X
Insert the SD memory card (
Y
page 168).
or
X
Connect a USB device (e.g. a USB memory
stick) (
Y
page 168).
X
Press the Ø button in the center con-
sole.
The
Vehicle
Vehicle
menu appears.
X
To select
System
System Settings
Settings
: slide 6 and
press the controller.
A menu appears.
X
To select
Data Import/Export
Data Import/Export
: turn and
press the controller.
X
Select
Import Data
Import Data
or
Export Data
Export Data
.
i
If you import data such as address data,
the existing data on COMAND is overwrit-
ten. You will see a message to this effect.
COMAND is restarted after the data import.
If PIN protection is activated, a PIN prompt
appears when you select
Export Data
Export Data
.
X
To enter the PIN: turn the controller and
press ¬ to confirm.
PIN protection is deactivated.
X
To select
Memory Card
Memory Card
,
USB 1
USB 1
or
USB 2
USB 2
:
turn and press the controller.
This function exports all the data to the
selected disc.
A window appears with the message that
the data has been exported.
You can export address data, bookmarks,
system settings that you have made and radio
station lists, for example. Personal music files
in the MEDIA REGISTER cannot be saved and
imported again using this function.
Mercedes-Benz is not liable for any loss of
data.
Reset function
You can reset COMAND to the factory set-
tings. Amongst other things, this will delete
all personal COMAND data. These include:
R
Channel presets
R
Entries in the destination memory
R
Entries in the list of previous destinations
in the navigation system
R
Entries in the address book
R
Authorized telephone
In addition, an activated PIN protection,
which you have used to protect your data
against unwanted export, will be deactivated.
Resetting is recommended before selling or
transferring ownership of your vehicle, for
example.
Data on the internal hard drive, e.g. music
files in the MEDIA REGISTER, will be deleted.
Mercedes-Benz is not liable for any loss of
data.
X
Press the Ø button in the center con-
sole.
The
Vehicle
Vehicle
menu appears.
X
To select
System Settings
System Settings
: slide 6 the
controller, turn and press to confirm.
A menu appears.
X
To select
Reset
Reset
: turn and press the con-
troller.
A prompt appears asking whether you wish
to reset.
X
Select
Yes
Yes
or
No
No
.
If you select
No
No
the process is canceled.
If you select
Yes
Yes
a prompt will appear again
asking whether you really wish to reset.
X
Select
Yes
Yes
or
No
No
.
If you select
Yes
Yes
a message will be shown.
COMAND is reset to the factory settings
and restarted.
44
Reset function
System
settings