Mercedes-Benz C-Sedan 2015 COMAND Manual - Manual (Page 107)

Procedure and general information
Searching for and authorizing (connect-
ing) a mobile phone
Before using your mobile phone with
COMAND for the first time, you will need to
search for the phone (
Y
page 105) and then
authorize it (
Y
page 106). Depending on the
mobile phone, authorization either takes
place by means of Secure Simple Pairing or
by entering a passkey. COMAND automati-
cally makes the system suitable for your
mobile phone available. You can recognize
Secure Simple Pairing by a code which is dis-
played in COMAND and on the mobile phone.
You can recognize the passkey system by the
fact that you have to enter a code on the
mobile phone and in COMAND. The mobile
phone is always connected automatically
after authorization.
If COMAND does not detect your mobile
phone, this may be due to particular security
settings on your mobile phone. You can also
start the search procedure and authorization
on the mobile phone (
Y
page 107).
Device-specific information on authorizing
and connecting Bluetooth ® -capable mobile
phones can be found on the Internet at
http://www.mercedes-benz.com/
connect.
You can authorize up to 15 mobile phones.
Only one mobile phone can be connected to
COMAND at any one time.
De-authorizing (disconnecting) a mobile
phone
The connection is terminated automatically if
you leave the receiver range of COMAND or
deactivate Bluetooth ® on your mobile phone.
If you no longer want the Bluetooth ® connec-
tion to be established automatically, the
mobile phone must be de-authorized (discon-
nected) (
Y
page 108).
Searching for a mobile phone
X To call up the telephone menu: press the
% button.
X To switch to the menu bar in the telephone
menu: slide 6 the controller.
X To select Connect Device Connect Device : turn the con-
troller and press to confirm.
The device list is displayed.
X To select Search for Phones Search for Phones : turn and
press the controller.
A message is displayed that Bluetooth ®
must be activated on the mobile phone and
must be made visible to other devices.
X To select Start Search Start Search : press the con-
troller.
The available mobile phones are displayed
in the device list.
The duration of the search depends on the
number of Bluetooth ® telephones within
range and their characteristics.
If a new phone is found, it appears in the
device list with the Ï symbol. You can now
authorize (connect) the mobile phone found
(
Y
page 106).
If the device list is already full, you will be
requested to de-authorize a mobile phone
(
Y
page 108).
When you call up the device list again, de-
authorized devices will be removed from the
list. To update the device list, start the search
again.
Connecting/disconnecting a mobile phone
105
Telephone
Z