Kontron PCI-760 - Manual (Page 81)

10. AMI BIOS Configuration
PCI-760 – User’s Guide (V1.10) 79
10.8. Exit
10.8.1. Save Changes and Exit
This field saves the settings you have made and exits BIOS Setup.
10.8.2. Discard Changes and Exit
This field exits BIOS Setup without saving the new settings.
10.8.3. Discard Changes
This field resets all values to those that were active when the computer was turned on without exiting BIOS Setup.
10.8.4. Load Optimal Defaults
This option allows you to load the default values of your system configuration. These default settings (manufacturing
settings) are optimal and enable all high performance features.
10.8.5. Load Failsafe Defaults
By this option the system can reload all default settings, which are permanently stored in the BIOS-ROM.
These settings are not the optimized default settings (manufacturing defaults) for your system, but can be used, if after
changes, the system does not run reliably. The Fail-Safe settings are designed for maximum stability, but not maximum
performance.