Kontron PCI-760 - Manual (Page 69)

10. AMI BIOS Configuration
PCI-760 – User’s Guide (V1.10) 67
10.5.1.6. Wait For ‘F1’ If Error
This option specifies if errors detected during the boot time, determine the interruption of the boot procedure.
It is possible to choose between: Enabled and Disabled.
Enabled The boot procedure is stopped, whenever the BIOS detect an error. The system waits for a user
input.
Disabled The boot procedure will be not halted for any error that may be detected.
10.5.1.7. Hit ‘DEL’ Message Display
This option allows you to modify the setting for “Hit ‘DEL’ Message Display”.
It is possible to choose between: Enabled and Disabled.
Enabled This setting allows the system to display:
Hit Del to enter Setup
during memory initialization.
If “Quiet Boot” option is enabled, the Hit ‘DEL’ message will not display.
Disabled This setting prevents the system to display:
Hit Del to enter Setup
during memory initialization.
If “Quiet Boot” option is enabled, the Hit ‘DEL’ message will not display.
10.5.1.8. Interrupt 19 Capture
Set this value to allow option ROMs such as network controllers to trap BIOS interrupt 19.
It is possible to choose between: Enabled and Disabled .
Enabled The BIOS allows option ROMs to trap interrupt 19.
Disabled The BIOS prevents option ROMs from trapping interrupt 19.
10.5.1.9. Boot Delay Timeout
This option allows you to enable or to disable the “Boot Delay Time out”.
It is possible to choose between: Enabled and Disabled .