Ahci configuration (ahci settings) – Kontron PCI-760 User Manual
Page 50
10. AMI BIOS Configuration
48
PCI-760 – User’s Guide (V1.10)
10.3.3.
AHCI Configuration (AHCI Settings)
10.3.3.1.
AHCI BIOS Support
In order to support the AHCI (Advanced Host Controller Interface) (referring to IDE Configuration/ Configure SATA#1
as/AHCI setting) this option must be set to Enabled. For detailed information refer to “Serial ATA AHCI 1.2 Specification“.
Available settings:
Enabled
and Disabled.
10.3.3.2.
AHCI Port0/ /AHCI Port5
These options display the detected SATA devices (if configured in IDE Configuration/ Configure SATA#1 as to AHCI).
Each SATA detected device (AHCI configured) allows following:
SATA #(1/ /5)
with available settings:
Auto
and Not Installed.
S.M.A.R.T.
with available settings:
Enabled
and Disabled.
- CP3003-SA uEFI BIOS (72 pages)
- CP3003-SA (36 pages)
- CP3002 (38 pages)
- CP3002-RC uEFI (64 pages)
- CP-RIO3-05 (42 pages)
- CP3002-RC (30 pages)
- CP342 (52 pages)
- CP930 (46 pages)
- CP932 (52 pages)
- CP346 (72 pages)
- CP384 (66 pages)
- CP383 (74 pages)
- CP382 (58 pages)
- CP381 (60 pages)
- CP372 (64 pages)
- CP371 (60 pages)
- CP-RIO3-04S (38 pages)
- CP390 (36 pages)
- CPS3410 (9 pages)
- CPS3402 (9 pages)
- CPS3105 (9 pages)
- CPS3101 (9 pages)
- CPS3003-SA (19 pages)
- PB-SIO4 (34 pages)
- PB-SIO4A (34 pages)
- PB-DOUT8 (34 pages)
- VMOD-2 (82 pages)
- VSBC-32 (110 pages)
- VM42 (62 pages)
- Bootstrap Loader (24 pages)
- VMP1 with Netbootloader (120 pages)
- VMP1 (106 pages)
- NetBootLoader (86 pages)
- VMP2 (142 pages)
- VMP3 (154 pages)
- CP-RIO6-923 (32 pages)
- CP-RIO6-923-F (32 pages)
- CP-RIO6-001 (28 pages)
- CP-RIO6-001-HD-VGA (46 pages)
- CP-RIO6-M (20 pages)
- CP-RIO6-B (28 pages)
- CP6925 (42 pages)
- CP6002 uEFI BIOS (76 pages)
- CP6002 IPMI (40 pages)
- CP6002 (42 pages)