Kontron PCI-760 User Manual
Page 78
10. AMI BIOS Configuration
76
PCI-760 – User’s Guide (V1.10)
10.7.2.5.
LAN Boot
Possible settings are: Enabled and
Disabled
.
In order to use the LAN as boot device refer to the chapter 10.5.1.10 “1
10.7.2.6.
Wake Up From S5
Possible settings are: Enabled and
Disabled
.
10.7.2.7.
Wake Up From S5
Possible settings are: Enabled and
Disabled
.
10.7.2.8.
HDA Controller
This option allows you to enable or disable the HAD audio controller.
Possible settings are:
Enabled
and Disabled.
10.7.2.9.
SMBUS Controller
This option allows you to enable or to disable the SMBUS controller.
Possible settings are:
Enabled
and Disabled.
10.7.2.10.
SLP_S4# Min Assertion Width
The available settings are: 1 to 2 seconds, 2 to 3 seconds,
3 to 4 seconds
and
4 to 5 seconds
.
10.7.2.11.
Restore on AC Power Loss
10.7.2.12.
This option allows you to specify the state the system should return to when power is restored after AC power
loss.
The available settings are: Power Off, Power On
and
Last State
.
10.7.2.13.
PCIE Ports Configuration
10.7.2.14.
PCIE Port 0 / PCIE Port 1 / PCIE Port 2 / PCIE Port 3
Possible settings are:
Auto,
Enabled
and Disabled.
10.7.2.15.
PCIE High Priority Port
Available settings are:
Disabled
,
Port 0, Port 1, Port 2, Port 3, 2. Ethernet and 1. Ethernet.
10.7.2.16.
PCIE Port 0 IOxAPIC Enable / PCIE Port 1 IOxAPIC Enable / PCIE Port 2 IOxAPIC Enable /
PCIE Port 3 IOxAPIC Enable
Available settings are:
Disabled
and Enabled.