Kontron PCI-760 - Manual (Page 77)

10. AMI BIOS Configuration
PCI-760 – User’s Guide (V1.10) 75
10.7.2. South Bridge Chipset Configuration
You can use this field to select options for the SouthBridge chipset configuration.
10.7.2.1. USB Function
This option allows you to enable or disable the host controllers.
Possible settings are: Disabled, 2 USB Ports, 4 USB Ports, 6 USB Ports, 8 USB Ports, 10 USB Ports and 12 USB Ports .
10.7.2.2. USB Port Configure
Possible settings are: 6x6 USB Ports and 8x4 USB Ports.
10.7.2.3. USB 2.0 Controller
This option (EHCI USB controller function) is always enabled.
10.7.2.4. 1. / 2. / 3. Ethernet Controller
These options allow you to enable or to disable the corresponding Ethernet controller.
Possible settings are: Enabled and Disabled.
1. Ethernet Controller is always Enabled.
2. Ethernet Controller is set by default to Enabled.
3. Ethernet Controller is set by default to Disabled .
In order to use the LAN as boot device refer to the chapter 10.5.1.10 “1 st / 2 nd , / 3 rd , .... / n th Boot Device”