Kontron PCI-760 - Manual (Page 32)

9. Jumpers and Connectors Overview
30 PCI-760 – User’s Guide (V1.10)
9.1.3.17. J33: Suspend LED
J33 is available for connecting an LED, which indicates whether the system is in suspend mode or powered-up. The LED
will be on when the system is in the suspend mode. If the system is fully powered up the LED will be dark.
J33: Pin-Row: 2-pin Pin # Signal Name
1 GND
1 2
2 SUSLED
9.1.3.18. J20 and J23: Audio Connectors
This is an interface for the I/O bracket audio cable that allows connection of audio devices (J20 for: Line-In, Line-Out,
Mic-In) and (J23 for: Surround).
Signal Name Pin # J20: 10-pin Header Pin # Signal Name
LINEOUT_R 1 2 LINEOUT_L
AUDIO_GND 3 4 AUDIO_GND
LINEIN_L 5 6 LINEIN_R
AUDIO_GND 7 8 AUDIO_GND
MIC_IN_R 9
1
9
2
10
10 MIC_IN_R
Signal Name Pin # J23: 10-pin Header Pin # Signal Name
SURR_OUT_R 1 2 SURR_OUT_L
AUDIO_GND 3 4 AUDIO_GND
SIDESURR_L 5 6 SIDESURR_R
AUDIO_GND 7 8 AUDIO_GND
LFE_OUT 9
1
9
2
10
10 CEN_OUT
9.1.3.19. J41: Connector for Temperature Sensor
J41: Pin-Row: 2-pin Pin # Signal Name
1 THRM_D+
2 THRM_D-
The PCI-760 board comes factory-fitted with a temperature sensor [to the connector (J41)]. This
temperature sensor measures the inside ambient temperature of the computer.