Kontron PCI-760 User Manual
Page 14
6. Features
12
PCI-760 – User’s Guide (V1.10)
PCI -Support
•
up to five PCI-Masters, 32-bit/33 MHz according to PCI Specification v2.3 for:
- one PCI-Master on board: optional single MiniPCI connector, type IIIA; signaling 3.3 V (installed Mini PCI card
must be 5 V tolerant)
Hint for the optional MiniPCI connector: the additional USB signals on reserved pins
for e. g. bluetooth
are not supported.
- up to four PCI-Masters routed to the PICMG 1.3 edge connector
Supports 5V PCI backplanes
•
PCI Express routed to the PICMG 1.3 edge connector
- 4x PCIe x1 or 1x PCIe x4
- 1x PCIe x16
Real Time Clock (RTC)
Motorola MC146818B-compatible RTC with 256 bytes of battery-backed RAM
•
RTC supports a date alarm that allows for scheduling a wake-up event up to 30 days in advance
•
A coin-cell battery (CR2032) powers the real-time clock and CMOS memory
•
A battery socket eases replacing empty batteries
•
Battery backup time > 5 years
•
Accuracy better than 50ppm (max. deviation 4s/24 hours) within the whole temperature range
BIOS
The BIOS is based on the AMI BIOS Core Release 8.00.14.
•
4 MB (32MBit), Flash BIOS-ROM connected to the SPI-Bus
•
Upgradeable via Flash updating tool
•
PXE-Boot
•
Legacy USB Support including USB 2.0
•
Support of Serial Ports (RS232, serial console redirection); COM2 configurable as RS422 and RS485
•
Support of VGA (CRT)
•
ACPI Support
•
Hardware Monitoring
Power and System Management
•
BIOS-support for CPU-Internal temperature-sensor/s
•
Power management according to ACPI 3.0
•
Three Fan controls, additional four FAN-Tacho inputs available on Hardware Monitor Connector
•
Supports Full-on (S0), Suspend (S1), Suspend-To-RAM (S3), Suspend-To-Disk (S4) and Soft-Off (S5).
•
Wake-up events
•
Optional customized logo in boot-screen feature