Kontron PCI-760 - Manual (Page 53)

10. AMI BIOS Configuration
PCI-760 – User’s Guide (V1.10) 51
10.3.5. USB Configuration
This field allows you to select options for USB configuration.
10.3.5.1. Legacy USB Support
This function enables or disables support for legacy USB. Enabling legacy USB support allows using USB devices under
DOS and other non-Plug & Play operating systems.
Possible settings are: Enabled , Disabled and Auto.
If “Auto” is set, the system searches for USB devices. Whether no device is detected, the BIOS disable this option in
background.
10.3.5.2. USB 2.0 Controller Mode
The [USB 2.0 Controller Mode] option is available only if the option [ Legacy USB Support ] is set to Enabled
or Auto.
This option allows you to set the data signaling rate for the USB 2.0 controller.
Possible settings are: FullSpeed and HiSpeed .
HiSpeed This setting allows data signaling rate of 480 Mbps.
FullSpeed This setting allows data signaling rate of 12 Mbps.
10.3.5.3. BIOS EHCI Hand-Off
The [BIOS EHCI Hand-Off)] option is available only if the option [ Legacy USB Support ] is set to Enabled or
Auto.
This option allows you to enable support for operating systems without “EHCI Hand-Off” features.
Possible settings are: Enabled and Disabled.
10.3.5.4. USB Beep Message
This option allows you to enable or disable generating a beep during USB devices enumeration.
Possible settings are: Enabled and Disabled.