Kontron PCI-760 User Manual
Page 70
![background image](/manuals/637971/70/background.png)
10. AMI BIOS Configuration
68
PCI-760 – User’s Guide (V1.10)
¾
Boot Device Priority
In the Boot Device Priority menu you define the sequence in which the system BIOS searches the drives for system files
to start the operating system.
List of devices available for use as boot devices: (the possible selection is depending on the system configuration).
10.5.1.10.
1
st
/ 2
nd
, / 3
rd
, .... / n
th
Boot Device
Available settings: [SATA: PS-WDC WD800AAJS-00PSA0]; [CD/DVD: PM-HL-DT-STDVD-ROM GDRH2];
[CD/DVD: PM-HL-DT-STDVD-ROM GDRH2]; [USB: Kingston DataTraveler]; [Network: B04 D00 Yukon PXE]; [Network:
B03 D00 Yukon PXE] and Disabled
.
Boot Devices (examples)
Description
1
st
Boot Device
SATA: PM-Hitachi HDS721616PLA380
Primary Master (not included)
2
nd
Boot Device
CD/DVD: SM-ASUS DVD-E818AT
Secondary Master (not included)
3
rd
Boot Device
USB: USB Flash Disk
(not included)
In order to boot from LAN (network booting) you have to access the [
BIOS Setup/Chipset/South Bridge
Configuration]
and set “
Enable
” for the corresponding LAN Controller and the appropriate option
[LAN Boot]
.
Set the Network device in
[BIOS Setup/Boot/Boot Device Priority]
as
[1st Boot Device]
.
Each of these changes will be adopted only, if “Save Changes and Exit” is selected after changing of the
Boot Devices Priority (example for Network Device as 1
st
boot device)
Description
1
st
Boot Device
Network: IBA GE Slot 00C8 v 1270
2
nd
Boot Device
CD/DVD: SM-ASUS DVD-E818AT
Secondary Master (not included)
3
rd
Boot Device
USB: USB Flash Disk
(not included)
4
th
Boot Device
SATA: PM-Hitachi HDS721616PLA380
Primary Master (not included)