Kontron JRexplus-DC - Manual (Page 55)

KTD-S0008-F Page 50 Setup Guide
JRexplus-DC User's Guide
22.5.2.8 Trusted Computing Submenu
Feature Option Description
TCG/TPM Support No
Yes
Enable or disable TPM (Trusted Platform Module) support
Execute TPM Command Don't change
Disabled
Enabled
Enable or disable the TPM activation
Clearing the TPM Press Enter Initiate a process of returning the TPM to factory defaults
TPM Enable/Disable
Status
N / A Show the TPM status
TPM Owner Status N / A Show the TPM owner status
22.5.3 Display Control Submenu
Feature Option Description
JDA Revision N / A Show the JDA revision (JILI Data Area)
VBIOS Revision N / A Show the VGA BIOS revision
Boots Graphic Adapter
Priority
IGD
PCI/IGD
Define the search strategy for the primary graphic controller
Internal Graphics Mode
Select
Disabled
Enabled, 1MB
Enabled, 8MB
Select the amount of system memory used by the onchip
graphic controller
DVMT Mode Select Fixed Mode
DVMT Mode
Combo Mode
DVMT (Dynamic Video Memory Technology) is an enhance-
ment of the UMA concept - ensures the most efficient use of
available memory. Fixed mode disables dynamic allocation
DVMT/FIXED Memory 64MB
128MB
Maximum DVMT
Maximum DVMT dynamically allocates the maximum amount
of memory that may need, more than the usual 128MB of
graphics memory
Boot Display Device CRT, DVI
CRT + DVI
LVDS, CRT + LVDS
DVI + LVDS
Control the boot display
Flat Panel Mode Auto
Fixed Mode
PAID
FPID
Use PAID (Panel Adapter ID) or FPID (Flat Panel ID) to
manually enter a panel record (KONTRON specific). If Auto
the board is searching for a JILI3 (KONTRON), EDID (VESA)
or a DisplayID (VESA) record
Flat Panel Type VGA 640x480
SVGA 800x600
XGA 1024x768
SXGA 1280x1024
Select a predefined flat panel resolution